IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 23-21
3 Uploading
23
Online Function
3.2 Upload Dialog Box
This section describes the settings and buttons of the Upload dialog box.
■ Project Name
The project file is saved with the currently displayed name. To change the project name, enter a new name for the
file. The maximum number is 50 characters.
■ Comment
Displays comment on project data downloaded to the Touch.
■ Type Number
Displays the type number selected in project data downloaded to the Touch.
■ Modified
Displays the time that project data downloaded to the Touch was last saved in WindO/I-NV3.
■ Location
Specifies the location for saving uploaded project files.
Click to display the Save Project After Uploading dialog box. Select the location for saving, then click Save.
■ Upload files used in this project from the External Memory
To upload files located on an external memory inserted in the Touch that are used by the project together with
project data, select the file to be uploaded from the following.
Recipe Files
■ Upload
Starts uploading of project data.
■ Cancel
Stops uploading of project data.
You cannot use the following characters in the project name.
\ / : * ? " < > |

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English