IDEC SmartAXIS Touch FT1A Series User Manual

1 Overview
19-2 SmartAXIS Touch User’s Manual
1.2 Functions that Support Text Groups
The functions that support text groups are as follows.
Item Setting
Screen Popup Screen Title
Drawings Text Text
Buttons
Bit Button Registration Text
Word Button Registration Text
Goto Screen Button Registration Text
Key Button Registration Text
Selector Switch Registration Text
Lamps
Pilot Lamp Registration Text
Multi-State Lamp Registration Text
Data
Displays
Numerical Input Unit
Message Display Message
Message Switching
Display
Message
Alarm List Display Message
Alarm Log Display Message, Title
Numerical Display Unit
Charts
Bar Chart X-axis and Y-axis scale labels
Line Chart X-axis and Y-axis scale labels
Alarm Log Messages displayed in data output as CSV
Data Log Labels displayed in data output as CSV
Operation Log Recorded item labels and event names displayed in data output as CSV
When the text group is switched, the displayed Base Screen is reset. Popup Screens and internal devices
have the same behavior as when the Base Screen is switched. If the Close while changing Base Screen
check box is selected on the Options tab in the properties dialog box for the Popup Screen, the displayed
Popup Screen is closed. The behavior of the internal devices differs according to the internal devices. For
details, refer to Chapter 27 “Internal Devices” on page 27-1.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English