IDEC SmartAXIS Touch FT1A Series User Manual

3 FBD Program
12-32 SmartAXIS Touch User's Manual
3.1 Basic Operation for WindLDR
This section describes basic procedures for operating WindLDR.
●
Start WindLDR
1
On the WindO/I-NV3 View tab, in the Workspace group, click (control function).
WindLDR starts.
2 If the ladder program editing screen is displayed, click FT1A Touch on the status bar, and then click PLC Selection
on the displayed drop-down list.
The PLC Selection dialog box is displayed.
3 Select FBD, and then click OK.
Next, create a FBD program.
3FBD Program
The PLC Selection dialog box can also be displayed by clicking PLC Type in the PLC group on the
Configuration tab.
To change the default programming language, select the programming language, and then click Use as
Default.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English