SmartAXIS Touch User’s Manual 7-3
1 Bit Button
7
Buttons
1.2 Bit Button Configuration Procedure
This section describes the configuration procedure for Bit Buttons.
1 On the Home tab, in the Parts group, click Buttons, and then click Bit Button.
2 Click a point on the edit screen where you want to place the Bit Button.
3 Double-click the dropped Bit Button and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
To switch to Advanced mode, click Advanced.
To Next Page
Loading...
Need help?
General
