IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 9-21
1 Numerical Input
9
Data Displays
1.4 How to Enter Values
Use the keypad or key buttons to write a value to a device with the Numerical Input. The input methods are as
follows.
■ Pressing the Numerical Input and Entering Values from the Standard Keypad
Arrange a Numerical Input on the screen and in its properties dialog box, on the General tab, under Keypad, select
Standard for Type.
External device
Touch
1234
999
1234
999
999
D100:
1234
D100:
1234
D100:
999
999
D100:
999
Press Numerical Input
Write value
to device
Press ENT
Display value of device
(Entry mode)
Display value of device
(Entry mode)
Close standard keypad
Display standard keypad
Enter "999"
Display value of device
(Display mode)
Display value of device
(Display mode)
When the following operations are performed, entry mode is canceled and the current value of device is
displayed in the Numerical Input. To enter a value, press the Numerical Input again to set it to entry mode.
• CAN is pressed.
•When the Focus is moved by ENT button check box on the General tab is cleared, a value was
written to the device by pressing ENT.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English