SmartAXIS Touch User’s Manual 9-55
4 Message Display
9
Data Displays
4.2 Message Display Configuration Procedure
This section describes the configuration procedure for Message Displays.
1 On the Home tab, in the Parts group, click Data Displays, and then click Message Display.
2 Click a point on the edit screen where you want to place the Message Display.
3 Double-click the dropped Message Display and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
To switch to Advanced mode, click Advanced.
To Next Page
Loading...
Need help?
General
