IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 15-7
1 Overview
15
Operation Log Function
1.5 Using the Data
The saved data can be used in the following ways.
• Save to and read from an external memory
Operation log data is saved in a CSV file format into the
external memory which it can be read on your computer.
For details, refer to “4.1 Saving the Data as a CSV File” on
page 15-17.
Operation Log data
Sampling Time User Screen No. Event Name Part Name Details Changed to
12/01/2011 12:00:10 - Base1 Power ON - - -
12/01/2011 12:01:23 User1 Base1 Switch to Base Screen - - Base2
12/01/2011 12:02:45 User1 Base2 Change Users - - User2
12/01/2011 12:03:06 User2 Base2 Change Operation Modes - - System Mode
12/01/2011 12:04:11 User2 Base2 Press buttons BitSwitch - -
12/01/2011 12:04:11 User2 Base2 Write Data to any Devices - LDR 0 55
Operation Log data
(CSV)
Book1
Sheet1
Sheet2
Sheet3
Sampling Time User Screen No. Ev
ent Name Part Name Details Changed to
12/01/2011 12:00:10 - Base1 Power ON - - -
12/01/2011 12:01:23 User1 Base1 Switch to Base Screen - - Bas e2
12/01/2011 12:02:45 User1 Base2 Change Users - - User2
12/01/2011 12:03:06 User2 Base2 Change Operation Modes - - System Mode
12/01/2011 12:04:11 User2 Base2 Press buttons BitSwitch - -
12/01/2011 12:04:11 User2 Base2 Write Data to any Devices - LDR 0 55

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English