IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 2-57
4 Customizing WindO/I-NV3
2
WindO/I-NV3 Basic Operations
4.1 Configuring the Work Environment
You can configure WindO/I-NV3 settings such as mode and options when editing screens, the path when selecting files,
and the path for automatic backups. The settings configured here are saved even when you exit WindO/I-NV3.
The procedure for configuring the work environment is shown below.
1 Click and then click WindO/I-NV3 Options.
The WindO/I-NV3 Options dialog box is displayed.
2 Change the settings on each tab as desired.
4 Customizing WindO/I-NV3

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English