SmartAXIS Touch User's Manual 23-29
6 System Information
23
Online Function
6.2 Target Information Dialog Box
This section describes the settings and buttons of the Target Information dialog box.
■ Target Runtime Information
■ Target Project Information
■ Opened Project Information
Product Series: Shows the type number of Touch
Runtime Version: Shows the runtime system version of the Touch.
Memory Space (byte): Shows the maximum amount of project data (bytes) that can be downloaded to the Touch.
Font Information: Checks the additional fonts currently installed on the Touch. Click this button to display the
Font Information dialog box. For details, refer to “Font Information Dialog Box” on page 23-
30.
External Memory Information: Checks the state of an external memory inserted in the Touch, its total capacity,
available capacity, and used capacity. Click this button to display the External Memory
Information dialog box. For details, refer to “External Memory Information Dialog Box”
on page 23-30.
Project Name: Shows the project name of projects downloaded to the Touch.
Modified Date: Displays the time that project data downloaded to the Touch was last saved in WindO/I-NV3.
Project Version: Displays the version of WindO/I-NV3 used to create the project data downloaded to the
Touch.
External Device Manufacturer: Displays the external device manufacturer configured in the project downloaded to the
Touch.
Protocol: Displays the communication driver configured in the project downloaded to the Touch.
Driver Version: Displays the version of the communication driver.
Project Name: Shows the project name of the project being edited.
Modified Date: Displays the time that the project being edited was last saved in WindO/I-NV3.
Version Number: Displays the version of WindO/I-NV3 used to create the project being edited.
This function can be used to show information about a project that is being edited and simultaneously check
information about project data downloaded to the Touch.
To Next Page
Need help?
General
