jcb 215 Service Manual

4-11
Circuit Schematics - Options
Hand Held Tools
1 Selector Switch
2 Indicator Lamp
3 Roadbreaker Solenoid
Dedicated Quickhitch
1 Hitch Enable Switch
2 Quick-Hitch Relay
3 Warning Buzzer
4 Lever ‘hold-in’ Button
5 Lever ‘hold-in’ Button
6 Quick-Hitch Solenoid
Pole Planter
1 Selector Switch
2 Grab Solenoid
3 Rotation Solenoid
Smooth Ride System (SRS)
1 Accumulator Solenoids
2 Hose Burst Control Valve Relay (if fitted)
3 Selector Switch
4 Hose Burst Control Valve Solenoids (if fitted)
Return to Dig (Shovel Reset)
5 Lever ‘hold-in’ Solenoid
6 Ram Proximity Switch
7 Selector Switch
Hydraulic Speed Control (HSC)
1 Selector Switch
2 HSC Solenoid
3 HSC Relay
4 Control Lever Push-Button
Connections:
S From 14 on page C/4-5 and 9 on C/4-13 as applicable
Section C Electrics
9803/3280
Section C
4-11
Issue 2*
Basic System Operation
*
*
*
*
*
*
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk

jcb 215 Specifications

General

Engine Power	74 hp
Rated Operating Capacity	2, 100 lbs
Lift Path	Vertical
Tipping Load	4, 200 lbs
Net Engine Power	74 hp
Width over Tires	1, 800 mm
Height to Top of Cab	2, 300 mm
Hinge Pin Height	2, 800 mm
Travel Speed	11 km/h
Travel Speed (High)	11 km/h