FX-1/FX-1R Maintenance Manual
13-8-2. Adjusting the Boards of the Head Unit
13-8-2-1. Adjusting the Head Main Board Assembly
(1) Switch Settings
The switches have already been set corresponding to the status of the board assembly.
VR7
Make the jumper switch W1
short-circuited.
DSW1
DSW2
DSW3
DSW4
VR1
VR2 VR3 VR4 VR5
DSW1 All switches are turned OFF before shipment.
This switch is used with all bits set at OFF.
DSW2 All switches are turned OFF before shipment.
This switch is used with all bits set at OFF.
13-33
Rev. 2.00
To Next Page
Loading...
Need help?
General
