Juniper BGP - CONFIGURATION GUIDE V 11.1.X User Manual

Table 41: show ldp neighbor Output Fields (continued)
Field DescriptionField Name
Time that the adjacency has been up, in hh:mm:ss formatUp
State of graceful restart, enabled or disabledGraceful Restart
State of graceful restart helper mode, enabled or disabledHelper Mode
Value for reconnect time received from peer in FT TLV, in
milliseconds
Reconnect Time
Value for recovery time received from peer in FT TLV, in
milliseconds
Recovery Time
Status of the neighbor’s graceful restart, one of the following:State
LDP session is not establishednonexistent
Neighbor LSR is restartingrestarting
Session with neighbor LSR has reestablished after the neighbor
restarted; label bindings are being exchanged
recovering
LDP session is upoperational
IP address of LDP peerNeighbor
Number of initialization messages received and sentInitialization
Number of keepalive messages received and sentKeepalive
Number of notification messages received and sentNotification
Number of address messages received and sentAddress
Number of address withdraw messages received and sentAddress withdraw
Number of label mapping messages received and sentLabel mapping
Number of label request messages received and sentLabel request
Number of label withdraw messages received and sentLabel withdraw
Number of label release messages received and sentLabel release
Related Topics ■ show ldp neighbor
Monitoring LDP Profiles
Purpose Display a specific LDP profile, or all LDP profiles.
334 ■ Monitoring LDP Profiles
JUNOSe 11.1.x BGP and MPLS Configuration Guide

Juniper BGP - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	BGP - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English