SiteRange: 20
VPLS Route Targets
No Route Targets configured
Flood Next Hop: Index 1048578
Meaning Table 86 on page 621 lists the show bridge group details command output fields.
Table 86: show bridge groups details Output Fields
Field DescriptionField Name
Name of the VPLS instance for which information is displayedBridgeGroup
Bridging capability currently enabled; for a VPLS instance, this field
always displays default
Bridge Mode
Length of time, in seconds, that a MAC address entry can remain
in the forwarding table before expiring
Aging Time
Whether acquisition of dynamically learned MAC addresses is
enabled or disabled
Learning
Maximum number of dynamic MAC addresses that the VPLS
instance can learn
Max Learn
Whether SNMP link status processing is enabled or disabledLink Status Snmp Traps
Name of the subscriber policy currently in effectSubscriber Policy
Number of ports currently configured for the VPLS instance,
including network interfaces and the VPLS virtual core interface
Port Count
Number of network interfaces currently configured for the VPLS
instance
Interface Count
Name of the transport virtual router configured for the VPLS
instance
Transport Virtual Rtr
Unique route distinguisher configured for the VPLS instanceRoute Distinguisher
Site name configured for the VPLS instanceSiteName
Numerical site identifier configured for the VPLS instanceSiteId
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed.
Multi-homed
Priority value for the VPLS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes
Site-Priority
Maximum number of sites that can participate in the VPLS domain
associated with the VPLS instance
SiteRange
Extended community identifiers, also known as route targets, for
each VPLS instance configured on the router
VPLS Route Targets
Monitoring VPLS Configuration and Statistics for all VPLS Instances â– 621
Chapter 11: Monitoring VPLS
To Next Page
Loading...
Need help?
General
