host1#show bridge vplsTest port brief
Port Interface Status
------ ------------------------- ------------
1 FastEthernet1/1.1 Up
2 ATM10/1.1.1 Up
3 vpls vplsTest Up
Meaning Table 90 on page 628 lists the show bridge port command output fields.
Table 90: show bridge port Output Fields
Field DescriptionField Name
Name of the VPLS instance to which the interface belongsBridgeGroup
Port number on which this interface residesPort Number
Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Operational Status
State of the physical interface: Up, DownAdmin Status
Whether SNMP link status processing is enabled or disabled for
the specified interface
Snmp Link Status Trap
Maximum number of dynamic MAC addresses that the interface
can learn
Max Learn
Name of the subscriber policy currently in effect for the interfaceSubscriber Policy
Displays statistics information for the specified portStatistics
Number of octets received on this interfaceIn Octets
Number of frames received on this interfaceIn Frames
Number of incoming packets discarded on this interfaceIn Discards
Number of incoming errors received on this interfaceIn Errors
Number of octets transmitted on this interfaceOut Octets
Number of frames transmitted on this interfaceOut Frames
Number of outgoing packets discarded on this interfaceOut Discards
Number of outgoing errors on this interfaceOut Errors
Elapsed time since statistics counters were last resetTime since counters last
reset
Hardware packet queue associated with the specified traffic class
and interface
queue
Length of the queue, in bytesQueue length
Number of packets and bytes forwarded on this queueForwarded packets, bytes
628 â– Monitoring Configuration, Statistics, and Status for VPLS Ports
JUNOSe 11.1.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
