Related Topics â– show ip bgp next-hops
Monitoring VPWS Connections
Purpose Display configuration and status information for VPWS L2VPN connections configured
on the router. The details keyword displays detailed information about the
connections.
Action To display detailed information about connections for all VPWS instances configured
on the router:
host1:pe1# show l2vpn connections details
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name westford Site Id 1
Multi-homed: Yes
Site-Priority: 45 Route Targets:
Route Target: RT:100:1 both
Admin Oper
Interface Local-Site-Id Remote-Site-Id state state
--------------- ------------- -------------- ------- -----
FastEthernet4/1 1 2 enabled up
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
CM = Control Word Mismatch
LN = Local Site not Designated
RN = Remote Site not Designated
Local Remote Remote MPLS Up-down
Site Site State PE In-label Out-label NH Idx Time
----- ------ ----- ------- -------- --------- -------- --------
1 2 UP 2.2.2.2 25 74 0000001d 01:49:12
L2VPN: l2vpn2
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:12
Site Range 20
Sites:
Site Name boston Site Id 3
Multi-homed: Yes
Site-Priority: 100 Route Targets:
Route Target: RT:100:2 both
Monitoring VPWS Connections â– 679
Chapter 14: Monitoring VPWS
To Next Page
Need help?
General
