Locating the Serial Number on an EX2200 Switch or Component
If you are returning an EX2200 switch or hardware component to Juniper Networks for
repair or replacement, you must locate the serial number of the switch or component.
You must provide the serial number to the Juniper Networks Technical Assistance Center
(JTAC) when you contact them to obtain Return Materials Authorization (RMA).
If the switch is operational and you can access the CLI, you can list serial numbers for
the switch and for some components with a CLI command. If you do not have access to
the CLI or if the serial number for the component does not appear in the command output,
you can locate the serial number ID label on the physical switch(see Figure 59 on page 149)
or component.
NOTE: Ifyouwantto find the serial number on the physicalswitch component,
you will need to remove the component from the switch chassis, for which
you must have the required parts and tools available.
•
Listing the Switch and Components Details with the CLI on page 148
•
Locating the Chassis Serial Number ID Label on an EX2200 Switch on page 148
Listing the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the following
CLI command:
user@switch> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis CV0209096579 EX2200-24P-4G
Routing Engine 0 REV 2A 750-026464 CV0209096579 EX2200-24P-4G, POE
FPC 0 REV 2A 750-026464 CV0209096579 EX2200-24P-4G, POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
PIC 1 REV 2A 750-026464 CV0209096579 4x GE SFP
Power Supply 0 PS 550W AC
Fan Tray Fan Tray
Locating the Chassis Serial Number ID Label on an EX2200 Switch
EX2200 switches have serial number ID labels located on the rear panel of the chassis
(see Figure 59 on page 149).
Copyright © 2011, Juniper Networks, Inc.148
Complete Hardware Guide for EX2200 Ethernet Switches
To Next Page
Loading...
Need help?
General
