Juniper EX2200 Series User Manual

•
“Mounting an EX2200 Switch On or Under a Desk Using Screws” on page 78 (using
the desk/wall mounting screws)
•
“Mounting an EX2200 Switch Using the Magnet Mount” on page 94 (using the
separately orderable magnet sheet)
3. Follow instructions in “Connecting Earth Ground to an EX Series Switch” on page 103.
4. Follow instructions in “Connecting AC Power to an EX2200 Switch” on page 109 or
“Connecting DC Power to an EX2200 Switch” on page 110.
5. Perform initial configuration of the switch by following instructions in “Connecting
and Configuring an EX Series Switch (CLI Procedure)” on page 129 or “Connecting and
Configuring an EX Series Switch (J-Web Procedure)” on page 131.
6. Set the switch’s management options by following the appropriate instructions:
•
Connecting an EX Series Switch to a Network for Out-of-Band Management on
page 113
•
Connecting an EX Series Switch to a Management Console on page 115
Related
Documentation
Rack Requirements for EX2200 Switches on page 57•
• Cabinet Requirements for EX2200 Switches on page 58
• Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches
on page 60
Unpacking an EX2200 Switch
The EX2200 switches are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
CAUTION: EX2200 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
1. Move the shipping carton to a staging area as close to the installation site as possible,
but where you have enough room to remove the system components.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Remove the accessory box and verify the contents in it against the parts inventory on
the label attached to the carton.
5. Pull out the packing material holding the switch in place.
Copyright © 2011, Juniper Networks, Inc.72
Complete Hardware Guide for EX2200 Ethernet Switches

Juniper EX2200 Series Specifications

General

Brand	Juniper
Model	EX2200 Series
Category	Network Router
Language	English