Juniper EX2300-C Hardware Guide

Understanding EX2300 Virtual Chassis Hardware Configuration
Virtual Chassis is a feature in Juniper Networks EX2300 Ethernet Switches that allows
you to interconnect two or more EX2300 switches, enabling them to operate as a unified,
single, high-bandwidth switch. You can interconnect a maximum of four EX2300 switches
(including EX2300-C switches) by using the uplink ports configured as Virtual Chassis
ports (VCPs) to form a Virtual Chassis.
All EX2300 switch models support Virtual Chassis, and you can interconnect different
models, which allows you to choose among a range of possible port configurationswithin
the same Virtual Chassis.
The Virtual Chassis configuration includes a master switch and a backup switch, with all
other switches in the configuration designated as linecard member switches. Virtual
Chassis operation is managed through the master switch. Each switch in the Virtual
Chassis is assigned a unique member ID that is displayed on the switch LCD.
Related
Documentation
• Understanding EX Series Virtual Chassis Components
• Planning EX2300 Virtual Chassis on page 119
Copyright © 2017, Juniper Networks, Inc.120
EX2300-C and EX2300 Switches Hardware Guide

Juniper EX2300-C Specifications

General

Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Rack mounting	Yes
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, EN 55024, EN 300386, CE
Console port	USB
SFP+ module slots quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	12
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Tagged VLAN, Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Power consumption (max)	20 W
Memory type	DRAM
Noise level	0 dB
Flash memory	2000 MB
Processor frequency	1250 MHz
Virtual stacking (units)	4
Operating altitude	0 - 1524 m
Non-operating altitude	1524 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Throughput	47 Mpps
Jumbo frames	9216
MAC address table	16000 entries
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X
Switch type	Managed
Switch layer	L2/L3

Weight and Dimensions

Depth	239 mm
Width	279 mm
Height	44 mm
Weight	2480 g