CHAPTER 2
Chassis Components and Descriptions
•
Chassis Physical Specifications for EX2300 Switches on page 15
•
Chassis Status LEDs in EX2300 Switches on page 16
•
Management Port LEDs in EX2300 Switches on page 18
•
RJ-45 Network Port LEDs and Uplink Port LEDs in EX2300 Switches on page 19
Chassis Physical Specifications for EX2300 Switches
The EX2300 switch chassis is a rigid sheet-metal structure that houses the hardware
components. Table 5 on page 15 summarizes the physical specifications of the EX2300
switch chassis.
Table 5: Physical Specifications of the EX2300 Switch Chassis
EX2300 ValueEX2300-C ValueDescription
1.75 in. (4.45 cm)1.72 in. (4.36 cm)Chassis height
•
17.4 in. (44.19 cm)
•
19 in. (48.26 cm) with mounting brackets
attached
•
10.98 in. (27.9 cm)
•
18.86 in. (47.9 cm) with mounting brackets
attached
Chassis width
•
Models without PoE capability: 10.2 in.
(25.9 cm)
•
Models with PoE capability: 12.2 in. (30.98 cm)
9.45 in. (23.8 cm)Chassis depth
•
EX2300-24T: 7.25 lb (3.29 kg)
•
EX2300-24P: 9.89 lb (4.49 kg)
•
EX2300-24T-DC: 7.83 lb (3.55 kg)
•
EX2300-48T: 8.28 lb (3.76 kg)
•
EX2300-48P: 11.06 lb (5.02 kg)
•
EX2300-C-12T: 5.45 lb (2.48 kg)
•
EX2300-C-12P: 6.99 lb (3.17 kg)
Weight
Related
Documentation
Rack Requirements on page 59•
• Cabinet Requirements on page 60
• Mounting an EX2300 Switch on page 128
• Installing and Connecting an EX2300 Switch on page 127
15Copyright © 2017, Juniper Networks, Inc.