Juniper QFX5200 User Manual

CAUTION: Do not stack any of the hardware components.
Packing a QFX5200 Device or Component for Shipping
IN THIS SECTION
Packing a QFX5200 Switch for Shipping | 165
Packing QFX5200 Components for Shipping | 166
If you are returning a QFX5200 or component to Juniper Networks for repair or replacement, pack the
item as described in this topic.
Before you pack a QFX5200 or component:
• Ensure that you have taken the necessary precauons to prevent electrostac discharge (ESD)
damage. See "Prevenon of Electrostac Discharge Damage" on page 194.
• Retrieve the original shipping carton and packing materials. Contact your JTAC representave if you
do not have these materials, to learn about approved packing materials. See Contacng Customer
Support to Obtain a Return Materials Authorizaon for a QFX Series Device or Component .
Ensure that you have the following parts and tools available:
• ESD grounding strap.
• Anstac bag, one for each component.
• If you are returning the chassis, an appropriate screwdriver for the mounng screws used on your
rack or cabinet.
This topic describes:
Packing a QFX5200 Switch for Shipping
To pack a QFX5200 for shipping:
1. Power down the switch and remove the power cables. See "Powering O a QFX5200" on page
144.
165

Juniper QFX5200 Specifications

General

Brand	Juniper
Model	QFX5200
Category	Switch
Language	English