Ramp Warning
WARNING: When installing the device, do not use a ramp inclined at more than 10
degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10 graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus yliää 10 astea.
Averssement Ne pas uliser une rampe dont l'inclinaison est supérieure à 10 degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não ulize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados.
Varning! Använd inte ramp med en lutning på mer än 10 grader.
Rack-Mounng and Cabinet-Mounng Warnings
Ensure that the rack or cabinet in which the device is installed is evenly and securely supported. Uneven
mechanical loading could lead to a hazardous condion.
WARNING: To prevent bodily injury when mounng or servicing the device in a rack,
take the following precauons to ensure that the system remains stable. The following
direcves help maintain your safety:
• The device must be installed in a rack that is secured to the building structure.
• The device should be mounted at the boom of the rack if it is the only unit in the
rack.
• When mounng the device on a parally lled rack, load the rack from the boom
to the top with the heaviest component at the boom of the rack.
177
To Next Page
Loading...
Need help?
General