Juniper QFX5200 User Manual

Table 5: Network Port Link/Acvity LEDs on QSFP+ Ports on a QFX5200-32C and QFX5200-32C-L
(Connued)
Color State Descripon
Green On steadily A link is established, but there is no link acvity.
NOTE: When congured for 10-Gigabit Ethernet, the LED is lit green
when at least one of the four 10-Gigabit Ethernet SFP+ breakout links is
established.
Blinking A link is established, and there is link acvity.
NOTE: When congured for 10-Gigabit Ethernet, the LED is lit green
when at least one of the four 10-Gigabit Ethernet SFP+ breakout links is
established.
Amber Blinking All four LEDs blink to indicate the beacon funcon was enabled on the
port.
QFX5200-48Y Port Panel
IN THIS SECTION
Network Ports | 14
Port Groups | 15
Network Port LEDs | 16
The port panel of the QFX5200-48Y supports port conguraon speeds of 100 or 40 Gigabit Ethernet,
and 25 or 10 Gigabit Ethernet. The QFX5200-48Y has 48 small form-factor pluggable 28 (SFP28) ports
(0 through 47) that can be congured as either 10 Gigabit Ethernet or 25 Gigabit Ethernet. The
QFX5200-48Y also has six quad small form-factor pluggable (QSFP28) ports (48 through 53 that can be
congured as either 100 Gigabit Ethernet or 40 Gigabit Ethernet. The SFP28 ports default to 10 Gigabit
Ethernet but can be congured in groups of four ports to 25 Gbps speeds. The QSFP28 ports auto-
13

Juniper QFX5200 Specifications

General

Brand	Juniper
Model	QFX5200
Category	Switch
Language	English