To Next Page

To Previous Page

2. Remove the cables that connect the QFX5200 to all external devices.

3. Remove all eld-replaceable units (FRUs) from the switch.

4. Have one person support the weight of the switch while another person unscrews and removes the

mounng screws.

5. Remove the switch from the rack or cabinet (see "QFX5200 Installaon Safety Guidelines" on page

96) and place the switch in an anstac bag.

6. Place the switch in the shipping carton.

7. Place the packing foam on top of and around the switch.

8. If you are returning accessories or FRUs with the switch, pack them as instructed in "Packing

QFX5200 Components for Shipping" on page 166.

9. Replace the accessory box on top of the packing foam.

10. Close the top of the cardboard shipping box and seal it with packing tape.

11. Write the RMA number on the exterior of the box to ensure proper tracking.

Packing QFX5200 Components for Shipping

CAUTION: Do not stack switch components. Return individual components in separate

boxes if they do not t together on one level in the shipping box.

To pack and ship QFX5200 components:

• Place individual FRUs in anstac bags.

• Ensure that the components are adequately protected with packing materials and packed so that the

pieces are prevented from moving around inside the carton.

• Close the top of the cardboard shipping box and seal it with packing tape.

• Write the RMA number on the exterior of the box to ensure proper tracking.

Juniper QFX5200 User Manual

Questions and Answers: