Related
Documentation
SRX240 Services Gateway Chassis on page 31•
• SRX240 Services Gateway Front Panel and Back Panel Views on page 13
• SRX240 Services Gateway Built-In Interfaces on page 16
• SRX240 Services Gateway LEDs on page 18
• SRX240 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 10
• SRX240 Services Gateway Power Supply on page 25
SRX240 Services Gateway Air Filter
The air filter for the SRX240 Services Gateway (both with AC power supply models and
with DC power supply models) is hot-insertable and hot-removable. The air intake opening
is at the right side of the chassis (when the chassis is viewed from the front side). The
air filter weighs approximately 0.2 lbs (0.09 kg). To ensure optimal operation, you must
replace the air filter periodically (every six months).
NOTE: An air filter is not shipped with the SRX240 Services Gateway with
AC power supply model. To meet NEBS requirements, you must order the air
filter separately and install it. ContactyourJuniper Networks customer service
representative for more information.
Related
Documentation
• Replacing the Air Filter on the SRX240 Services Gateway on page 121
• SRX240 Services Gateway Chassis on page 31
• SRX240 Services Gateway Front Panel and Back Panel Views on page 13
• SRX240 Services Gateway LEDs on page 18
• SRX240 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 10
• SRX240 Services Gateway Power Supply on page 25
Copyright © 2015, Juniper Networks, Inc.24
SRX240 Services Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
