To Next Page

To Previous Page

6 7

KEB COMBIVERT F5

Name: Basis

04.05.04

Chapter Section Page Date

Functional Description Protective Functions

6.7.10 Special

Functions

Here functions are summarised which affect the behaviour of the inverter in certain

operating cases.

Special Functions (Pn.65)

Bit Value Meaning

0 Switching behaviour GTR7 (see Chapter 6.7.9 „GTR-control“)

0 GTR7 does not switch in the status „LS“ (default)

1 GTR7 switches dependent on the level also at „LS“

1 This bit determines the error-/warning message, that is triggered at the

switching of an external error input (Pn.4).

0 Pn.4 is selection for external error-/warning message. The response to

this message (A.EF/E.EF) is defined with Pn.3.

1 Pn.4 is selection for error undervoltage (E.UP). Pn.3 has no function in

this case.

2 Status, if the power circuit is not ready (no_PU). This setting applies to

the output switching conditions do.0...7 = 4...6 and the ERROR-bit in

the status word (sy.44/sy.51 Bit 1).

0 State „no_PU“ is an Error

1 State „no_PU“ is an Error

3 Wie bei LS kann der GTR7 auch bei Fehler aktiviert levelabhängig wer-

den. Ausnahme: Bei Öffnen der Reglerfreigabe und bei nicht ver-

sorgtem Leistungsteil (no_PU) wird der GTR7 abgeschaltet.

0 GTR7 nicht aktiv bei Fehler

1 GTR7 levelabhängig bei Fehler

(not at F5-B)

KEB COMBIVERT F5 Servo User Manual

Other manuals for KEB COMBIVERT F5 Servo