KEB COMBIVERT F5 Servo User Manual

6
1
KEB COMBIVERT F5-M / S4
Name: Basis
12.05.04
Chapter Section Page Date
© KEB Antriebstechnik, 2002
All Rights reserved
Functional Desription Operating and Unit Data
6.1.2 Summary of In-
Parameter
in. 0 inverter type
in. 1 rated inverter current
in. 3 max. carrier frequency
in. 4 rated carrier frequency
in. 6 software version
in. 7 software date
in. 10 serial no. (date)
in. 11 serial no. (count)
in. 12 serial no. (AB-no. high)
in. 13 serial no. (AB-no. low)
in. 14 customer no. high
in. 15 customer no. low
in. 16 QS no.
in. 17 temp.- mode
in. 22 user parameter 1
in. 23 user parameter 2
in. 24 last error
in. 25 error diagnosis
in. 26 E.OC error counter
in. 27 E.OL error counter
in. 28 E.OP error counter
in. 29 E.OH error counter
in. 30 E.OHI error counter
in. 31 KEB-Hiperface
in. 32 Interface software date
The In- (Information) parameter group includes data and information about the
identification of the hardware and software as well as to the type and number of errors
that occurred. Following parameters are available:
6.1.3 Summary of Sy-
Parameter
As the name already says the Sy- (system) parameter group contains system-specific
parameters. Following parameters are available:
Sy. 2 inverter identifier
Sy. 3 power unit code
Sy. 6 inverter address
Sy. 7 baud rate ext. bus
Sy. 8 Bus synchron time
Sy. 9 HSP5 watchdog time
Sy. 11 baud rate int. bus
Sy. 32 scope timer
Sy. 41 control word high
Sy. 42 status word high
Sy. 43 control word long
Sy. 44 status word long
Sy. 50 control word low
Sy. 51 status word low
Sy. 52 set speed value
Sy. 53 actual speed value
Sy. 56 start display address

KEB COMBIVERT F5 Servo Specifications

General

Brand	KEB
Model	COMBIVERT F5 Servo
Category	DC Drives
Language	English