KEB COMBIVERT F5 Servo User Manual

3
HardwareControl Cards
3
15
KEB COMBIVERT F5-M / S
Name: Basis
18.05.04
Section PageDate
© KEB Antriebstechnik, 2002
All Rights reserved
Chapter
3.1.4 Terminal strip X2A
PIN Function Name Description
1 + Set Value input 1 AN1+ The input signal (0...±10 V; 0...±20 mA and 4...20 md is determined
2 - Set Value input 1 AN1- with An.0 / 10. Specification and control see chap. 6.2.2.
3 + Set Value input 2 AN2+ Resolution: 12 Bit, Ri = 30 kΩ, Scan time: 1 ms /
4 - Set Value input 2 AN2- at fast setpoint input: 250 µs (see chapter 6.4.2)
5 Analog Output 1 ANOUT1 The variable for outputting at analog output 2 is determined with
An.31 / 36. Specification and control see chap. 6.2.8.
6 Analog Output 2 ANOUT2 Voltage range: 0...±10V, Ri = 100 Ω, Resolution: 12 Bit
PWM frequency: 3,4 kHz, filter response 1. order: 178 Hz
7 +10 V Output CRF Reference voltage output +10 VDC +5% / max. 4 mA for set value
potentiometer.
8 Analog Mass COM Mass for analog in- and outputs
9 Analog Mass COM Mass for analog in- and outputs
10 Progr. Input 1 I1 Specifications, control und programming of the digital
11 Progr. Input 2 I2 inputs see chapter 6.3
12 Progr. Input 3 I3 All digital inputs are free programmable.
13 Progr. Input 4 I4 The control release is firmly linked with the input ST, but can be
14 Progr. Input Forward F additional occupied with other functions.
15 Progr. Input Reverse R Ri = 2,1 kΩ
16 Progr. Input Control Rel. ST Scan time: 1 ms
17 Progr. Input Reset RST
18 Transistor Output 1 O1 Specifications, control und programming of the digital
19 Transistor Output 2 O2 transistor outputs see chap. 6.3.12...6.3.22,
a total of max. 50 mADC for both outputs
20 +24 V Output U
out
approx. 24V DC output (max.100 mA)
21 20...30 V Input U
in
Ext. supply voltage for digital in-/outputs, potential 0V (X2A.22/23)
22 Digital Mass 0V Potential for digital in-/outputs
23 Digital Mass 0V Potential for digital in-/outputs
24 Relay 1 /NO contact RLA Programmable relay output 1 (Terminal X2A.24...26);
25 Relay 1 /NC contact RLB Programmable relay output 2 ( Terminal X2A.27...29)
26 Relay 1 /switching contact RLC Specifications, control und programming of the relay outputs
27 Relay 2 /NO contact FLA see chapter 6.3.11...6.3.17
28 Relay 2 /NC contact FLB max. 30 V DC, 1 A
29 Relay 2 /switching contact FLC
123456789
10 11 12 13 14 15 16 17 18 19 20 21
22 23 24 25 26 27 28 29

KEB COMBIVERT F5 Servo Specifications

General

Brand	KEB
Model	COMBIVERT F5 Servo
Category	DC Drives
Language	English