To Next Page

To Previous Page

SERVICE SCHEDULE 9

Every 80 operating hours

Every 40 operating hours

Every 20 operating hours

After 10 operating hours

Service the fork. ● ●

Perform the shock absorber service. ●

Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ● ● ●

Check the idle speed. ○ ● ● ●

Check the clutch setting. ( p. 103) ● ● ●

Final check: Check the vehicle for safe operation and take a test ride. ○ ● ● ●

Make a service entry in the KTM Dealer.net. ○ ● ● ●

○ One-time interval

● Periodic interval

9.3 Recommended work

every 48 months

every 12 months

Every 80 operating hours

After 20 operating hours / Every 20 operating hours

After 10 operating hours

Change the front brake fluid. ● ●

Change the rear brake fluid. (50 SX, FACTORY EDITION) ● ●

Change the rear brake fluid. (50 SX MINI) ● ●

Service the fork. ○

Perform the shock absorber service. ○

Lubricate the steering head bearing. ( p. 50) ● ●

Check/adjust the carburetor components. ● ●

Change the coolant. ( p. 97) ●

Perform minor engine service. Check the cylinder and piston. Check the inlet mem-

brane.)

● ●

Perform major engine service including removing and installing engine. (Check the

clutch. Change the piston. Change the connecting rod, conrod bearing, and crank pin.

Check the transmission. Change the crankshaft bearing. Change all engine bearings.)

●

○ One-time interval

● Periodic interval

Questions and Answers:

Need help?

Do you have a question about the KTM 50 SX 2022 and is the answer not in the manual?

KTM 50 SX 2022 Specifications

General