To Next Page

To Previous Page

11 SERVICE WORK ON THE CHASSIS

11.10 Installing the lower triple clamp

F02885-10

Main work

– Clean the bearing and sealing elements, check for damage,

and grease.

High viscosity grease ( p. 136)

– Insert the lower triple clamp with the steering stem. Mount

upper steering head bearing

–

Check whether upper steering head seal

is correctly posi-

tioned.

–

Push on protective ring

V02114-10

– Position the upper triple clamp with the handlebar.

–

Mount nut

, but do not tighten it yet.

F02179-11

(50 SX, FACTORY EDITION)

– Position the fork legs.

Bleeder screws

are positioned toward the rear.

Info

The second milled groove (from the top) must be

flush with the upper edge of the upper triple clamp.

Questions and Answers:

Need help?

Do you have a question about the KTM 50 SX 2022 and is the answer not in the manual?

KTM 50 SX 2022 Specifications

General