To Next Page

To Previous Page

11 SERVICE WORK ON THE CHASSIS

11.1 Raising the motorcycle with a lift stand

Note

Danger of damage The parked vehicle can roll away or fall over.

– Park the vehicle on a firm and level surface.

401942-01

– Raise the motorcycle at the frame underneath the engine.

Lift stand (78929955100)

Neither wheel is in contact with the ground.

– Secure the motorcycle against falling over.

11.2 Removing the motorcycle from the lift stand

Note

Danger of damage The parked vehicle can roll away or fall over.

– Park the vehicle on a firm and level surface.

402581-10

– Remove the motorcycle from the lift stand.

– Remove the lift stand.

–

To park the motorcycle, insert plug-in stand

into the plug-

in stand bracket on the left side of the vehicle.

Info

Remove the plug-in stand before riding.

11.3 Bleeding the fork legs

Preparatory work

– Raise the motorcycle with a lift stand. ( p. 40)

F02179-10

Main work

(50 SX, FACTORY EDITION)

–

Release bleeder screws

Any excess pressure escapes from the interior of the

fork.

– Tighten the bleeder screws.

KTM 50 SX 2022 Specifications

General

KTM 50 SX 2022 User Manual

Questions and Answers: