KTM 50 SX 2022 User Manual

13 WHEELS, TIRES
90
Info
Do not operate the foot brake lever when the rear
wheel is removed.
F02175-11
–
Remove spacers
5
.
13.4 Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when necessary.
F02176-11
Main work
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change the rear wheel bearing.
–
Clean and grease the contact surfaces
A
of the spacers.
Long-life grease ( p. 136)
– Insert the spacers.
Info
Insert the wide spacer on the left in the direction of
travel.
F02210-11
(50 SX, FACTORY EDITION)
–
Clean and grease wheel spindle
1
.
Long-life grease ( p. 136)
– Position the rear wheel and insert wheel spindle.
The brake linings are correctly positioned.
– Mount the chain.
–
Position chain adjuster
2
on both sides and push the
wheel spindle in all the way.

KTM 50 SX 2022 Specifications

General

Displacement	49 cc
Cooling System	Liquid cooled
Transmission	Single-speed automatic
Starter	Kickstarter
Front Brake	Disc brake
Rear Brake	Disc brake
Seat Height	684 mm
Weight (without fuel)	41.5 kg
Engine Type	Single cylinder, 2-stroke
Front Suspension	WP XACT USD, Ø 35 mm
Rear Suspension	WP XACT shock absorber
Fuel Tank Capacity	2.3 liters
Frame	Steel
Bore x Stroke	39.5 mm x 40 mm