13 SERVICE WORK ON THE CHASSIS
96
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when nec-
essary.
– Clean and oil the dust boots and inside fork tubes of both fork
legs.
Universal oil spray ( p. 158)
– Press the dust boots back into the installation position.
– Remove the excess oil.
Finishing work
– Take the motorcycle off the front lifting gear. ( p. 82)
– Install the front fender. ( p. 94)
– Remove the rear of the motorcycle from the lifting gear.
( p. 81)
13.27 Removing the windshield
F02054-10
–
Remove screw
1
and windshield
2
.
To Next Page
Loading...
Need help?
General
