Kubota K008-5 - Troubleshooting: Buzzer Sounds

122 W9215-8135-1
06/2021
Troubleshooting
Troubleshooting: Buzzer sounds
No. Item
Possible
cause
Sounds
Problem / Mal-
function
Preliminary measure Solution
1. Anti-theft
Wrong key, un-
able to start.
PiPiPi
The machine can-
not be started be-
cause the wrong
key has been in
-
serted.
Use the correct key. –
2. Anti-theft
Red registra-
tion key, una-
ble to start.
PiPiPi
Try starting the
engine with the
red key (for regis
-
tration).
Use the correct key. –
3.
Control lever
lock
Lower the con-
trol lever lock
to start the en
-
gine.
PiPiPi
The machine can-
not be started with
lowering the con
-
trol lever lock.
Raise the control le-
ver lock.
–
4. Anti-theft
Forgot to re-
move the key.
PiPiPi
Key must be
pulled out.
Pull out the key. –
5.
Control lever
lock
Control lever
lock solenoid
shorts.
PiPiPiPiPiPi ...
(Continuous
sounds)
There is a failure
in the control lever
lock.
Engine may be start-
ed but the machine
cannot move.
Inform your
KUBOTA dealer
immediately.
6.
Power sup-
ply
Overvoltage
PiPiPiPiPiPi ...
(Continuous
sounds)
–
The engine was
started by connect
-
ing a booster cable
from a 24V battery
or machine. Or the
alternator is out of
order.
Please stop
starting the en
-
gine in the 24 V
system immedi
-
ately.
7. Anti-theft
Antenna ab-
normality
PiPiPiPiPiPi ...
(Continuous
sounds)
The anti-theft sys-
tem has failed.
The engine can
-
not start.
–
Inform your
KUBOTA dealer
immediately.
8.
Power sup-
ply
External 12V
short
PiPiPiPiPiPi ...
(Continuous
sounds)
– – –
9. Seat belt
Engine starts
and the seat
belt is not
latched inside
the buckle.
PiPiPi ... PiPiPi
(Every 2 sec-
onds continu-
ous sounds)
Seat belt must be
latched inside the
buckle.
Securely insert the
seat belt inside the
buckle.
–