20 W9215-8135-1
06/2021
Safety rules
Safety labels on the machine
Care of safety labels
Keep safety labels clean and free from interfering objects.
Clean safety labels with soap and water and dry with a soft, clean cloth.
Replace damaged or missing safety labels with new ones from your KUBOTA dealer.
If a component with glued-on safety labels is replaced with a new part, make sure that the new labels are
affixed to the same location as the replaced component.
Safety labels should be stuck only on clean and dry surfaces. Press any air bubbles into the outer edge of the
sticker.
The positioning of the safety labels is illustrated in the following figures.