Kubota K008-5 User Manual

Operation
W9215-8135-1 75
06/2021
U10-5
 Move the left or right control console (2) up as far as possible
by pulling the control lever lock (1) up.
 Hold the hand rail tightly and get on to the machine.
 Sit down on the operator’s seat.
 When lowering the control lever lock, make sure no hands are
trapped.
Adjusting the operator's seat
Horizontal seat adjustment (seat stand-off)
 Pull the horizontal seat adjustment lever (1) up and move the
seat to the desired position by moving it forward or back, then
release the lever.
The control console must remain in the raised position
until the engine is started, as the engine can only be
started in this position.
Adjust the operator's seat so that fatigue-free and comfortable working is possible. It should be pos-
sible to operate all controls safely.
Check that the seat is locked in place.
1
2
STOP

Kubota K008-5 Specifications

General

Make	Kubota
Model	K008-5
Category	Compact Excavator
Bucket Capacity	0.022 m³
Max Dig Depth	1720 mm
Max Dump Height	2.43 m
Overall Length	2.75 m
Overall Width	700 mm
Fuel Tank Capacity	12 L