Safety inspection
W9215-8135-1 151
06/2021
SAFETY INSPECTION
All safety inspections are based on the national worker's protection regulations, safety regulations and technical
specifications applicable to the country in which the machine is operated.
The owner (operator) (page 13) should arrange for the safety inspections to be performed at specified intervals
according to national rules and regulations.
Based on their technical training and experience, the qualified personnel should have sufficient knowledge in the
domain of the machine described here and be familiar with the applicable national work safety regulations, acci
-
dent prevention regulations and the generally accepted technical rules so that they can assess the sound operat-
ing condition of the machine.
The qualified person must keep his appraisal and evaluation neutral and must not be influenced by personal, eco-
nomic or operational interests. The inspection is a visual and functional check of all components for condition and
completeness and of the effectiveness of the safety devices.
The performance of the inspection must be documented in the form of an inspection report containing at least the
following information:
Date and scope of the inspection indicating all pending checks,
Result of the inspection with a report of the determined faults,
Assessment with respect to commencing or continuing operation,
Information on necessary follow-up inspections and
Name, address and signature of the inspector.
The owner/employer (company) is responsible for the observance of the inspection intervals. The acknowledge-
ment and the elimination of the determined faults must be confirmed by the owner/employer in writing, along with
the date, in the inspection report.
The inspection report must be kept on file at least until the next inspection.
To Next Page
Loading...
Need help?
General
