132 W9215-8135-1
06/2021
Maintenance
Cleaning the excavator
The excavator can be cleaned with water and a commercial cleaning agent. Make sure no water gets into the elec-
trical system.
Use a plastic cleaner for plastic parts.
Before cleaning, shut down the engine and secure it against starting.
If a steam cleaner is used for cleaning the excavator, do not direct the steam jet at electric compo-
nents.
Do not direct a water jet into the intake opening of the air filter.
Do not clean the excavator with inflammable liquids.
The excavator may only be washed at suitable places (using oil and grease separators).