46 W9215-8135-1
06/2021
Description of the excavator
Identification of the excavator
The type plate of the excavator is located at the front of the swivel
frame. The owner should enter the stamped data in the field on the
back of the front cover.
1. CE label
2. Max. pulling capacity at the towing eyes
3. Max. vertical load at the towing eyes
4. Product identification number
5. Year of construction
6. Engine performance
7. Operating weight
8. Model name
9. Manufacturer
10. Representative
Product identification number
The machine’s product identification number (1) is stamped on the
swivel frame near the swing bracket.
The serial number can be determined based on the product identi-
fication number.
The last 5 digits of the product identification number make up the
serial number.
Identification of the engine
The engine can be identified based on the engine number and the
numbers for the engine family and engine type.
The numbers are affixed to the engine’s valve cover:
1. Engine number
2. Engine family and engine type
Standard equipment
The different models have the following standard equipment:
Spare parts list
K B C _ _ _ _ _ _ _ _ _ X X X X X
91
2
3
4
5
6
7
8
10
1
To Next Page
Loading...
Need help?
General
