Kubota K008-5 User Manual

144 W9215-8135-1
06/2021
Maintenance
Lubrication
The following describes all non-daily lubricating tasks at the attachments.
Swivel gear - grease
 Fill grease through the grease nipple (1) with a grease gun.
 Operate the excavator and swivel the swivel frame 360° sever-
al times in succession to distribute the grease evenly.
Pitch bearing - grease
 Fill grease through the grease nipple (1) with a grease gun.
 Operate the excavator and swivel the swivel frame 360° sever-
al times in succession to distribute the grease evenly.
Grease at each 90° position of the swivel gear. Fill a
total of approx. 50
g of grease (approx. 20 shots with
the grease gun). Refer to the "
Recommended lubri-
cants" section (page 130).
When moving the swivel frame, make sure no person
or material is in the swivel area. Turn the starter switch
to the STOP position and remove the key before the
next greasing procedure.
Grease at each 90° position of the swivel gear. Fill a
total of approx. 50
g of grease (approx. 20 shots with
the grease gun). Refer to the "
Recommended lubri-
cants" section (page 130).
When moving the swivel frame, make sure no person
or material is in the swivel area. Turn the starter switch
to the STOP position and remove the key before the
next greasing procedure.
1
K008-5
STOP
1
U10-5
1
K008-5
STOP
1
U10-5

Kubota K008-5 Specifications

General

Make	Kubota
Model	K008-5
Category	Compact Excavator
Bucket Capacity	0.022 m³
Max Dig Depth	1720 mm
Max Dump Height	2.43 m
Overall Length	2.75 m
Overall Width	700 mm
Fuel Tank Capacity	12 L