Kuka VisionTech 2.1 User Manual

93 / 109Issued: 11.10.2013 Version: KST VisionTech 2.1 V1
16 Troubleshooting
16 Troubleshooting
Fault Remedy
“Power” LED on the camera
does not light up
 Check that the plugged and screwed
connections along the connecting cable
are fitted securely.
 Check the connecting cable for dam-
age.
Neither LED “P1” nor LED
“P2” lights up
Check whether voltage is present at the
power connection (V1 or V2).
LED “P1” or LED “P2” lights
up red on the switch
Check that the DIP switches are set cor-
rectly. Both switches must be in the “ON”
position.
LED “Gigabit PoE Port”
does not light up on the
switch
The connected device does not support
PoE.

Kuka VisionTech 2.1 Specifications

General

Brand	Kuka
Model	VisionTech 2.1
Category	Robotics
Language	English