Kuka VisionTech 2.1 User Manual

95 / 109Issued: 11.10.2013 Version: KST VisionTech 2.1 V1
17 Decommissioning, storage and disposal
17 Decommissioning, storage and disposal
17.1 Decommissioning
Procedure 1. Disconnect the cameras and switch from the power supply.
2. Unplug the connecting cables.
3. Prepare the cameras and switch for storage or transportation.
17.2 Storage
Precondition If the cameras and switch are to be put into long-term storage, the following
points must be observed:
 The place of storage must be as dry and dust-free as possible.
 Avoid temperature fluctuations.
 Avoid condensation.
 Observe and comply with the permissible temperature ranges for storage.
 Select a storage location in which the packaging materials cannot be dam-
aged.
 Only store the cameras and switch indoors.
Procedure
 Cover the cameras and switch with ESD protection foil and seal it against
dust.
17.3 Disposal
When the cameras and switch reach the end of their useful life, dispose of
them as electrical scrap without disassembling.

Kuka VisionTech 2.1 Specifications

General

Brand	Kuka
Model	VisionTech 2.1
Category	Robotics
Language	English