Lantronix SLC 8000 Series User Manual

6: Basic Parameters
SLC™ 8000 Advanced Console Manager User Guide 114
the far right in the operation's row. The options that are available for that operation will be
ungreyed. Select one of the following options:
Performance Monitoring Commands
Go to Performance Monitoring Commands to view CLI commands which correspond to the web
page entries described above.
FQDN List
Use the FQDN List to add static hostname entries to the local hosts table so that the SLC 8000
can resolve hostnames that are not resolved via DNS.
To add/edit/delete hosts:
1. Click the Network tab and select FQDN List. The following page appears:
Figure 6-14 FQDN List
2. Enter the following information:
- To add a Host, enter the IP address, FQDN, and click Add/Edit Hosts. The IP address
Refresh Refreshes the information on the Performance Monitoring - Operations page.
RTT Results Displays the round trip time (RTT) results for the selected operation in a
separate window. The results show:
 the time that the packet was sent,
 the total round trip time for non-jitter probes or the source to destination time
and destination to source time for jitter probes, and
 the status for the packet - OK/successful or an error condition.
For more information, see Round Trip Times or Error Conditions).
Accumulated Results Displays the accumulated statistics for the selected operation in a separate
window. The results show parameters used for the selected operation, and the
minimum, average and maximum round trip times for all probes. For jitter
probes, the results show minimum, average and maximum one way latency
times, as well as jitter results for source to destination and destination to
source. For a probes, a summary of lost packets and error conditions is
displayed.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English