Lantronix SLC 8000 Series User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 383
startbyte <Byte Index>
logfile <NFS, USB or SD card Log File>
Defaults: bytes=1000, startbyte=1, numlines=40
Lists the NFS, USB, or SD card log files, either for a specific device port, or all log files in a USB,
NFS, or SD card location:
show log files nfs|usb|sdcard [localdir <NFS Mount Local Directory>]
[usbport <U1|U2>]
[deviceport <Device Port # or name>]
Network Commands
set network
Syntax
set network <parameters>
Parameters
startprobes <1-99999 Seconds>
probes <Number of Probes>
interval <1-99999 Seconds>
ipforwarding <enable|disable>
ip6forwarding <enable|disable>
Description
Sets TCP Keepalive and IP Forwarding network parameters.
set network bonding
Syntax
set network bonding <disabled|active-backup|802.3ad|load-balancing>
Description
Configure Ethernet Bonding.
set network dns
Syntax
set network dns <1|2|3> ipaddr <IP Address>
Description
Configures up to three DNS servers.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English