Lantronix SLC 8000 Series User Manual

12: User Authentication
SLC™ 8000 Advanced Console Manager User Guide 279
Figure 12-9 User Authentication > TACACS+
2. Enter the following:
Enable TACACS+ Displays selected if you enabled this method on the User Authentication page. If
you want to set up this authentication method but not enable it immediately, clear
the checkbox.
You can enable TACACS+ here or on the first User Authentication page. If you
enable TACACS+ here, it automatically displays at the end of the order of
precedence on the User Authentication page.
TACACS+ Servers 1-3 IPv4 or IPv6 address or host name of up to three TACACS+ servers.
Secret/Retype Secret Shared secret for message encryption between the SLC 8000 advanced console
manager and the TACACS+ server. Enter an alphanumeric secret of up to 127
characters.
Encrypt Messages Select the checkbox to encrypt messages between the SLC unit and the
TACACS+ server. Selected by default.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English