Lantronix SLC 8000 Series User Manual

14: Application Examples
SLC™ 8000 Advanced Console Manager User Guide 321
<shutdown messages from SUN>
6. Use the escape sequence to escape from direct mode back to the command line interface.
Dial-in (Text Mode) to a Remote Device
This example shows a phone line connection to the internal modem of the SLC, and a Sun server
connected to a device port. You can configure the modem for text mode dial-in, so a remote user
can dial into the modem using a terminal emulation program and access the Sun server.
Figure 14-3 Dial-in (Text Mode) to a Remote Device
In this example, the sysadmin would:
1. Configure the device port that the modem is connected to for dial-in:
[SLC]> set deviceport port 1 modemmode text
Device Port settings successfully updated.
[SLC]> set deviceport port 1 initscript "AT&F&K3&C1&D2%C0A"
Device Port settings successfully updated.
[SLC]> set deviceport port 1 auth pap
Device Port settings successfully updated.
[SLC]> set deviceport port 1 localsecret "password"
Device Port settings successfully updated.
[SLC]> set deviceport port 1 modemstate dialin
Device Port settings successfully updated.
[SLC]>
2. Configure the device port that is connected to the console port of the Sun UNIX server:
[SLC]> set deviceport port 2 baud 57600 flowcontrol none
Device Port settings successfully updated.
3. Dial into the SLC 8000 advanced console manager via the modem using a terminal emulation
program on a remote PC. A command line prompt displays.
4. Log into the SLC unit.
CONNECT 57600
Welcome to the SLC
login: sysadmin
Password:
Welcome to the SLC Console Manager
Model Number: SLC 8048
For a list of commands, type 'help'.
[SLC]>
Phone System
Remote User
Phone
Line
Sun UNIX Server
SLC 8000 Advanced Console Manager
Serial Cable to Port 2

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English