Lantronix SLC 8000 Series User Manual

4: Quick Setup
SLC™ 8000 Advanced Console Manager User Guide 52
The following table lists the SLC navigation actions, buttons, and options.
Table 4-3 LCD Arrow Keypad Actions
The following two tables list the SLC settings and parameters displayed on the LCD.
Table 4-4 Front Panel Setup Options with Associated Parameters
Button Action
Right arrow To move to the next option (e.g., from Network Settings to Console Settings)
Left arrow To return to the previous option
Enter (center button) To enter edit mode
Up and down arrows Within edit mode, to increase or decrease a numerical entry
Right or left arrows Within edit mode, to move the cursor right or left
Enter To exit edit mode
Up and down arrows To scroll up or down the list of parameters within an option (e.g., from IP
Address to Mask)
Left/Right Arrow
Table 4-5 Front Panel Setup Options, continued
Current Time Eth1
Network
Settings
Console
Port
Settings
Date / Time
Settings
Release Serial
Number
ID
User ID &
Current Time
Eth1 IP
Address
Baud Rate,
Data Bits,
Stop Bits,
Parity, Flow
Control
Time Zone Firmware
version and
date code
(display only)
Serial Number
(display only)
Device ID
(display only)
Eth1 Subnet
Mask
Data Bits Date/Time Restore
Factory
Defaults
Gateway Stop Bits
DNS1 Parity
DNS2 Flow Control
DNS3
Internal
Temperature
User Strings Location Device Ports
Reading in
Celsius &
Fahrenheit
Displays
configured user
string(s), if any.
Indicates the Rack
(RK), Row (RW),
& Cluster (CW)
locations.
Detects the
connection state
of each port:
0=No DSR input
signal detected on
device port
1=DSR input
signal detected on
device port
Up/
Down
Arrow

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English