Lantronix SLC 8000 Series User Manual

13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 303
3. Click the View Log button. Your specified system log displays. For example, if you select the
type All and the level Error, the SLC unit displays a log similar to this:
Figure 13-4 System Logs
From a queried system log (e.g., Figure 13-4), you may email this information to a specific
individual or to Lantronix Technical Support. See Emailing Logs and Reports (on page 311).
To clear system logs:
1. From the Maintenance > System Logs page, select Maintenance - System Logs.
2. Click the Clear Log button to clear all log information.
System Log Commands
Go to System Log Commands to view CLI commands which correspond to the web page entries
described above.
Ending at Select the endpoint of the range you want to view:
 End of Log: to view the log from the latest available ending time and date.
 Date: to view the log up to the last available log ending date and time.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English