Lantronix SLC 8000 Series User Manual

6: Basic Parameters
SLC™ 8000 Advanced Console Manager User Guide 71
To enter settings for one or both network ports:
1. Click the Network tab and select the Network Settings option. Either the Network > Network
Settings (1 of 2) or the Network > Network Settings (2 of 2) displays depending on your SLC
8000 model.
Figure 6-1 Network > Network Settings (1 of 2)
Note: The SFP NIC Info & Diagnostics link in the Network > Network Settings (1 of 2)
image above only appears in SLC units equipped with an SFP NIC board. The SFP NIC
Info & Diagnostics link brings you to the Network Settings > SFP NIC Information &
Diagnostics page.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English