Lantronix SLC 8000 Series User Manual

7: Services
SLC™ 8000 Advanced Console Manager User Guide 140
Services - Web Sessions
The Services > Web Server page enables you to view and terminate current web sessions.
To view or terminate current web sessions:
1. On the Services tab, click the Web Server page and click the Web Sessions link to the right.
The following page displays:
Figure 7-13 Web Sessions
2. To terminate, click the check box in the row of the session you want to terminate and click the
Terminate button.
3. To return to the Services > Web Server page, click the Back to Web Server link.
ConsoleFlow
ConsoleFlow is a cloud or on-premise portal for the centralized management of multiple Lantronix
Out-of-band management devices, including and SLC 8000 and SLB devices. A browser based
interface (including mobile phone app support) allows an administrator to view status, send
commands, view logs and charts and update firmware for an SLC 8000 or SLB. Each device can
communicate with the cloud server or on-premise server, sending status updates, responding to
commands sent by the server.
An SLC device requires a unique Device ID to communicate with the ConsoleFlow portal. The ID
is viewable in the ConsoleFlow settings. If a device is not already pre-configured with the ID, the ID
must be provisioned using Lantronix Provisioning Manager (LPM). See the Provisioning Manager
User Guide at https://www.lantronix.com/resources/product-index/.
The ConsoleFlow client follows a sequence of steps to connect to the cloud or on-premise
ConsoleFlow server, send status updates, check for firmware and configuration updates, and
respond to commands from the server. This series of steps is the same each time the client starts
- at SLC boot, or if the client is enabled. Any changes to the ConsoleFlow Device ID, Registration
settings or Messaging settings require the ConsoleFlow client to be disabled and re-enabled for
the changes to take effect.
1. Registration
The client will attempt to register to the Registration Host using the Project Tag and Device
ID. If registration fails, the client will wait 30 seconds and retry. The client will retry until it is

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English