15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 400
Parameters
netlog <off|error|warning|info|debug> auditlog <enable|disable>
authlog <off|error|warning|info|debug> auditsize <1-500 Kbytes>
diaglog <off|error|warning|info|debug> clicommands <enable|disable>
servlog <off|error|warning|info|debug> includesyslog <enable|disable>
devlog <off|error|warning|info|debug> snmp <enable|disable>
genlog <off|error|warning|info|debug> v1 <enable|disable>
syslogserver1 <IP Address or Name> v2c <enable|disable>
syslogserver2 <IP Address or Name> traps <enable|disable>
rpmlogsize <5-40 Kbytes> trapversion <1|2|3>
otherlogsize <5-400 Kbytes> nms1 <IP Address or Name>
telnet <enable|disable> nms2 <IP Address or Name>;
timeouttelnet <disable|1-30 minutes> alarmdelay <1-6000 Seconds>
telnetdata
dir <netin|netout|both> l
ocation <Physical Location>
webtelnet
<enable|disable> c
ontact <Admin Contact Info>
escapeseqtelnet <1-10 Chars> rocommunity <Read-Only Community>
outgoingtelnet <enable|disable> rwcommunity <Read-Write Community>
ssh <enable|disable> trapcommunity <Trap Community>
portssh <TCP Port> v3user <v3 RO User>
timeoutssh <disable|1-30 minutes> v3rwuser <v3 RW User>
sshdatadir <netin|netout|both> v3trapuser <v3 Trap User>
dsakeys <enable|disable> v3security <noauth|auth|authencrypt>
sha2 <enable|disable> v3auth <md5|sha|sha2_224|sha2_256|
webssh <enable|disable> sha2_384|sha2_512>
smtpserver <IP Address or Name> v3encrypt <des|aes>
smtpsender <Email Address> phonehome <enable|disable>
termbufsize <Number of Lines> phoneip <IP Address>
Description
Configures services (system logging, SSH and Telnet access, SSH and Telnet timeout, SNMP
agent, email [SMTP] server, and audit log.)
set services v3password
Syntax
set services v3password|v3phrase|v3rwpassword|v3rwphrase|v3trappassword
|v3trapphrase
Description
Set SNMP v3 read-only, read-write and trap password/passphrase.
show services
Syntax
show services
To Next Page
Loading...
Need help?
General
